Lathe Tailstock

Lathe Tailstock

Having a problem with my Delta Midi Lathe?

I’ve had it for about two years. Everything is in perfect condition except the tailstock. The wheel that turns to extend the tailstock slowly is really really stiff and difficult to turn, even when I have no wood mounted. It’s difficult in both directions.

I have checked, and it’s not some obvious problem (i.e. forgetting to loosen the bolt that locks it when it’s in position or something). Possibly it just needs to be cleaned out and greased.

So if that’s the case, which type of grease/oil should I use?

If the wheel is difficult to turn, and as you’ve said, you’ve checked for all of the obvious stuff, the mechanism has probably just become clogged with old grease and sawdust. Take it apart, clean all the parts and lubricate it.

Typically, you’d use a light machine oil for the quill and a small amount of lithium grease for the threads. Here are instructions for tailstock care. Sorry – not your exact model, but it should be about the same procedure.

Toolmex TUR 930MN/236 CNC Lathe 25″ Chuck Tailstock $314,500.00

2008 HAAS SL20 SL 20 CNC LATHE TAILSTOCK LOW HOURS $42,330.00

2001 Haas SL30T CNC Turning Center Lathe w/ Tailstock $42,000.00

2007 Femco HL25 CNC LATHE Tailstock Haas SL 20 $26,923.00

OKUMA LC-20/2SC 4-AXIS CNC LATHE w/TAILSTOCK & 8″ Chk $10,000.00

TAILSTOCK FOR LEBLOND LATHE $3,950.00

TAILSTOCK FOR LEBLOND LATHE $3,950.00

AML-618 Second Operation Lathe HLVH copy NO tailstock $2,950.00

CNC lathe hydraulic tailstock $2,700.00

MONARCH SERIES 80 30″ LATHE TAILSTOCK MT#6 TWO-SPEED $2,000.00

Mazak QT20 Universal CNC Lathe Quickturn T-2 TAILSTOCK $1,475.00

Cincinnati 200MT CNC Lathe Avenger 200 MT ___ Tailstock $1,275.00

Mazak Quick Slant 30N CNC Lathe __ Tail Stock Tailstock $1,275.00

Okuma LB10 CNC Lathe Turning Center _______ TAILSTOCK $1,260.00

HARDINGE PRECISION LATHE , 9″ X 18″ ; LEVER TAILSTOCK $1,250.00

HARDINGE TAILSTOCK FOR MODEL DSM-59 & DV-59 LATHES $1,250.00

HARDINGE TAILSTOCK FOR MODEL DSM-59 & DV-59 LATHES $1,250.00

Mazak Slant Turn 15 Universal 1000 CNC Lathe TAILSTOCK $1,250.00

HARDINGE TAILSTOCK FOR MODEL DSM-59 & DV-59 LATHES $1,250.00

Cincinnati 200 CNC Lathe Avenger _ Tailstock Tail Stock $1,225.00

Derbyshire 3c Jewelers Lathe Model A w/ Drill Tailstock $1,200.00

Mazak Slant Turn 15 Universal 1000 CNC Lathe TAILSTOCK $1,080.00

Toyoda CNC Lathe Turning Center __ Tailstock Tail Stock $1,075.00

Schaublin 70 jewelers watchmaker lathe turret tailstock $1,000.00

Mazak QT15N QT 15N CNC Lathe Turning Center _ TAILSTOCK $850.00

Mori Seiki SL-3 CNC Lathe SL3 Tailstock Tail Stock Assy $850.00

14.5in SOUTHBEND LATHE TAILSTOCK, XLNT CONDITION $650.00

Miyano JNC-35 CNC Lathe Hydraulic Tailstock Tail Stock $575.00

BISON 5″ 3 JAW SELF CENTERING LATHE TAILSTOCK CHUCK 4MT $499.00

Monarch 10EE Lathe Tailstock $495.00

Taig 1017 Lathe Starter Set Motor Tailstock Base NEW $340.48

TAILSTOCK UNIVERSAL LATHE $320.00

TAILSTOCK FOR 14″ CARDIFF LATHE TAIL STOCK $299.00

TAILSTOCK FOR 10″ LATHE ~ CASTING #51R3 ~ #2 MT TAPER $295.00

MYSTERY TAILSTOCK FOR APPROXIMATELY 15″ LATHE $250.00

LOGAN 11″ LATHE – COMPLETE TAILSTOCK – GREAT ORIG COND. $249.99

10″ MODEL 200 LOGAN LATHE TAILSTOCK $225.00

LONGEM TAILSTOCK BASE FOR 20″ LATHE NEW $225.00

5.0″ Tailstock for Mill or Lathe $200.00

South Bend 9″ Lathe Tailstock $200.00

clausing lathe series 4900 tailstock $200.00

11″ SOUTH BEND LATHE TAILSTOCK $169.00

EARLY CRAFTSMAN ATLAS 9″ LATHE – COMPLETE TAILSTOCK $149.99

5″ TURRET TAILSTOCK,#3 MT,1″ HOLES,6 POSITION FOR LATHE $125.00

Tailstock for 16″ Carroll Jaimeson Lathe $120.00

Monarch 10EE Lathe Tailstock Ram NOS $100.99

CRAFTSMAN 109 6″ LATHE TAILSTOCK COMPLETE $99.99

Drill Chuck, 1/2 with 2MT Short Arbor $29.95 This chuck is specifically designed for the mini lathe tailstock. The rated capacity of this chuck is 1 mm (0.039″) to 13 mm (0.512″)….

Nova Swing-Away Tailstock $159.99 Saves Time No Need To Keep Mounting And Un-Mounting Extra Bed Extension And/Or Tailstock….

Pro Live Center Set, #2 Morse Taper Pro Set $66.50 These high quality live centers feature double bearing construction and precise machining for minimum vibration and long life. A rare earth magnet set into the body securely holds the interchangeable centers in place. Set includes: 9/16″ cup center, 5/8″ to 1/4″ tapered cup, 3/4″ and extended 7/16″ cone center, 1/2″ cup center with point and 1/2″ cup center with removable 5/16″ guide pin. Comes co…

Lathe Tailstock

Lathes Questions and Answers

Detail of lathe machne drilling domestic device millng apparatus and their operation?
detail of lathe machne drilling machine millng machine and their operation and tool geometry You’re kid, right? It took me five years to gain my degree in machining, and you expect that can be condensed into a single post? Go to school.

Differencen between turret &capastan lathe?
The modern name for a capstan lathe used in industry is a ram-style turret lathe. A capstan lathe is a production electrical device that combines the features of the basic lathe along with a capstan style tailstock. This tailstock have a short slide upon which sits the hexagonal capstan head and a set of depth…

Do any one know who founded lathe?
if yes please tell Awe – - – the lathe one of woman/man’s earliest tools – - – knowing this gurantees me a newly ripped ^rse h^le will resort to cut & paste The oldest is naturally Egyotian this link has a picture…. http://www.historicgames.com/lathes/anci… “”"The Egyptian lathe is based on a stone…

Do you want to remove lathe and plasters?
Just bought an house for renovation the walls are wallpapered over lathe and plaster but are in good condition. Can I newly remove the wallpaper, unibond and re skim with plaster, or does it need to be removed? if the walls are contained by good order next leave them be as you…

Does any one know of any instructor-led seminar or training on different manuf techiques? e.g mill, lathe, etc
I am a mechanical engineer who wishes an overview of traditional mfg techniques as well as on some of the up-to-the-minute ones such as multi-axis lathe, 5 axis CNC, swiss-lathe, edm and etc.. Go to your local college or community college. They…

Does anyone know anything in the region of a lathe for graphite ?
I don’t really, but here are a couple of questions that might help win you more precise information: Are you machining EDM electrodes (or a similar king of thing), or modifying composite structures? For the former, I’d think any toolmaker lathe, with solid grades of carbide or…

Does anyone know how to turn drumsticks on a lathe?
I want to make my own drumsticks, but don’t know where to grasp started (i.e. what chisels to use, etc.). If anyone knows how to turn drumsticks on a lathe or a site that could help me that would be greatly appreciated. A honourable place to look or ask for…

Does anyone know in the order of making their own reloading dies, or swaging dies. I own a lathe, but freshly call for sustain.?
Is their any web pages or such on society making their own dies. Swaging included, but reloading (sizing and such) die would perk my interest. I am an avid reloader, just want to learn to engender…

Does anyone know of a museum that have hoary machines within it, such as a 100 year older metal working lathe ?
I have an old working metal lathe, made around 100 years ago and wondered if some collector or museum might want to display it. I live within a rural area, but I wondered if somewhere there is a…

Does anyone know of any school for cnc lathe machines?
CALIFORNIA CAREER SCHOOL, 1100 Technology Circle, Anaheim, CA. 92805-6329 Tel: 635-6585 or 1-8OO-499-6585, Web Site: www.californiacareerschool.edu is one I know of, and I do know that in Southern California, various district Adult Schools, own programs. You need to check with your local college district, and in the surrounding areas, of…

Does anyone know where on earth I can find a vintage DEWALT lathe?
www.vintageamerican.com/ http://www.owwm.com/classifieds/ you can post what you are looking for on the send site Source(s): www.vintageamerican.com/ http://www.owwm.com/classifieds/ Strange . . . last week Junipero getting ready to furnish vintage Dewalt lathe to scrap metal yard . . . at same time, Junipero suggest, “I bet there’s someone,…

Does anyone know where on earth I might be capable of purchase a used Mazak CNC Lathe?
Have you tried mazak? www.encoremachinetoolsales.com G&M Tools, Ashington, West Sussex Source(s): http://www.gandmtools.co.uk/

Does anyone no where on earth to buy a cheap wood turning lathe?
i have reciently been intrested within making baseball bats. i love baseball and have be intrested in making a wooden bat for some time. The only problem is that i can individual find mini lathes that are not big enough to turn a bat, or cormerrcial lathes,…

Does the Scheppach DMT450 woodturning lathe hold a morse taper tailstock?
If so, does anyone know what size MT it is. This site has it with a herald & tailstock cone as they word it of MK2, not sure if thats the same as #2 morris taper or not http://www.diytools.co.uk/diy/Main/sp-2-…

Fishing lures and copy lathes?
im looking to use a copy lathe to manufacture my own crankbaits. Two questions is it possible to modify an existing lathe and cause it into a copy lathe? If not what would i expect to pay for a used copy lathe? Ok, three questions does anyone enjoy a link to a video of a…

For lathe contraption? Can someone recount me what is this for [with picture]?
I want to sell this on auction but I am not sure what is this. Can someone tell what is this telephone and what is this for? Thank you. http://i484.photobucket.com/albums/rr209/greentea000/a-1.jpg It’s a machinist’s vise. It is used to hold a piece of work securely on a milling…

For metalworking lathes, why would you use a partly center surrounded by the tailstock?
live center ? to turn long slender parts in need leaving much taper You use a half centre contained by te tailstock to be able to machine radially down to the shaft foundation or piece of work in the lathe Source(s): Fitter Turner for the last…

Give detailed description of metal lathe?
Hey, just bringing this old quiz up for a vote. A metal lathe is a rigid machine tool designed to remove material from a workpiece, through the exploit of a cutting tool.A metal lathe usually spins the workpiece along a horizontal axis. A mandrel or chuck is mounted to the headstock of the lathe….

Had wet slick contained by attic. Ripped out moldy lathe and plaster surrounded by instantaneous nouns, but still enjoy oder. How wipe out?
may be in wall. i went through katrina,i be told to use a mixture of water,bleach,and dove dishwashing soap,it worked great.the bleach kills mold and dove soap dries it out its within the beams. This was a…

Has any one a pro copy lathe from B(a)Q and have to buy a replacement switch if so where on earth from.?
Check here: http://www.amazon.com/gp/redirect.html?ie=UTF8&location=http://www.amazon.com/gp/site-directory/&tag=funjok-20&linkCode=ur2&camp=1789&creative=9325 You will find what you like! Good luck!

Has anyone ever hear or read of the stories nearly the Dragon Lathe?
I remember the stories from some time ago. The lathe (or forge) was the place that an ancient smith created the five swords for the five guardians of the Earth and the Ealdwood (the Ealdwood was prearranged as the center of the universe). The smith’s furnace where…

Has anyone read “Lathe of Heaven” by Ursula K. Leguin?
What is it about? Any good? I read the book years ago and it really stayed next to me. George Orr is a sympathetic character who is cursed with ‘effective dreaming’, which alters the course of adjectives reality on earth. His dreams basis the time stream to skip and go…

Having a problem beside my Delta Midi Lathe?
I’ve had it for about two years. Everything is surrounded by perfect condition except the tailstock. The wheel that turns to extend the tailstock slowly is really really stiff and difficult to turn, even when I hold no wood mounted. It’s difficult in both directions. I have checked, and it’s not some…

Help….Wood Lathes?
what tools do you use to cut when you are using a wood lathe. all are right except the first response Bert had it right. Lathe chisels have long strong handle to give you the proper leverage for safety. If you didn’t know this, I most strongly push for you to get some training before you mess beside…

Hi every one do any body enjoy any info almost the lathe electrical device XL 1640 .. ?
lathe machine … Machine Type : horizontal Control : Manual Number of Axes : 2 Cutting Diameter : 400 mm Cutting Length : 1000 mm Bar / Bore : 65 mm Tool Stations : 1 Spindles : 1 Motor Power : 7.5…

More Lathesquestions please visit : MachineryFAQ.com

About the Author

MachineryFAQ.com

Lathe $11.65 Lathe

Popular Mechanics Lathe Fundamentals $16.15 Popular Mechanics Lathe Fundamentals

Lathe Operation And Maintenance $35.95 Lathe Operation And Maintenance

The Lathe Book $19.48 This is the only book of its kind — dedicated to every aspect of the lathe. Completely revised and updated, it includes information on how to choose a lathe, how to maintain and repair a lathe, and basic techniques.

Lathe Design $27.48 Lathe Design : Construction And Operation, With Practical Examples Of The Lathe Work (1919) by Oscar E. Perrigo Published in 2007 by Kessinger Publishing, LLC

14” Swing 40” Centers, 3Hp, 1Ph, 230V Geared Head Lathe $8041.95 ? Uniquely designed exclusively by JET. ? The hardened and ground gears are featured in the headstock and gearbox. ? Dl-4 spindle is precision ground for accuracy and supported by high-quality tapered roller bearings. ? Headstock is constantly oiled during operation. ? Splined, not keyed, shafts are utilized in the headstock. ? Gearbox gives large threading and feed capabilities with no gear changes. ? V-way bed design is induction hardened and ground. ? Gap bed section provided for larger diameter work. ? Independent leadscrew and feed rod. ? Spindle actuation control is apron mounted. ? Inch-metric dials are standard. ? Compound and cross slide have backlash elimination. ? Adjustable gibs are incorporated in the carriage and slideways. ? Tailstock may be offset for turning tapers and includes an inch-metric graduated quill. ? Tolerance test certificate included. Standard Equipment ? Heavy-Duty Stand ? 6” 3-Jaw Direct Mount Chuck with Top ? Reversing Jaws ? 8” 4-Jaw Chuck ? 12” Face Plate ? Four-way Tool Post ? Steady and Follow Rest ? Micro-Carriage Bed Stop ? Front Removable Chip Tray ? Spindle Jog Button ? Foot Brake ? Coolant System with Splash Guard ? Metric Change Gears ? Halogen Work Lamp ? Centers and Headstock Center Sleeve ? Threading Dial ? Tool Box and tools Specifications ? Swing Over Bed (in.) 14 ? Swing Over Cross Slide (in.) 8-1/2 ? Swing Through Gap (in.) 20 ? Distance Between Centers (in.) 40 ? Spindle Bore (in.) 1-1/2 ? Spindle Mount Dl-4 ? Spindle Taper (With Sleeve) MT-5 (MT-3) ? Number of Spindle Speeds 12 ? Range of Spindle Speeds (RPM) 40 – 1,800 ? Number of Longitudinal and Cross Feeds 40 ? Longitudinal Feeds Range (in./rev.) .0012-.0294 ? Range of Crossfeeds (in./rev.) 0.0003 – 0.0103 ? Number of Inch Threads 40 ? Range of Inch Threads 4-112TPI ? Number of Metric Threads 22 ? Range of Metric Threads (mm) 0.45 – 7.5 ? Maximum Tool Size (in.) /8 x 5/8 ? Maximum Compound Slide Travel (in.) 3-1/2 ? Maximum Cross Slide Travel (in.) 6-3/8 ? Maximum Carriage Travel (in.) 37-1/2 ? Tailstock Spindle Travel (in.) 4-3/4 ? Taper in Tailstock Spindle MT-3 ? Steady Rest Capacity (in.) 3-3/4 ? Follow Rest Capacity (in.) 2-3/4 ? Width of Bed (in.) 10-1/2 ? Motor 3HP,230V,lPh ? Dimensions 73-3/4”L x 29-1/2”W x 47-1/2”H ? Net Weight (lbs.) 2191By JET.

Geared Head Bench Lathe – 13” Swing 40” Centers, 2Hp, 1 Ph, 230V $5328.95 ? One of JET’s most popular lathes now comes with an enclosed gearbox as a standard feature Enclosed gearbox design provides smooth, quite operation. ? Fast, easy speed changes. ? Hardened and ground gears are featured in the headstock and gearbox. ? Dl-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings. ? Headstock is constantly oiled during operation. ? Gear box gives wide inch threading and feed capabilities with no gear changes. ? V-way bed design is induction hardened and ground. ? Gap bed section provided for larger diameter work. ? Independent leadscrew and feed rod. ? Spindle actuation control is apron-mounted. ? Compound and cross slide have backlash elimination. ? Adjustable gibs are incorporated in the carriage and slideways. ? Tailstock may be offset for turning tapers and includes an inch-metric graduated quill. ? Oil pan included. ? Tolerance test certificate included. Specifications: ? Swing Over Bed (in.) 13 ? Swing Over Cross Slide (in.) 7-25/32 ? Swing Through Gap 18-3/4 ? Length Of Gap (in.) 8 ? Distance Between Centers (in.) 40 ? Hole Through Spindle (in.) 1-3/8 ? Spindle Mount D1-4 ? Spindle Taper (with Sleeve) MT-5(MT-3) ? Number Of Spindle Speeds 8 ? Range Of Spindle Speeds (RPM) 70-2,000 ? Number of Longitudinal and Cross Feeds 40 ? Longitudinal Feeds range (in./rev) .0036 – .1005 ? Range of Cross Feeds (in./rev.) .0012 – .0345 ? Number Of Inch Threads 40 ? Range Of Inch Threads (T.P.I.) 4 – 112 T.P.I. ? Number Of Metric Threads 27 ? Range Of Metric Threads (mm) 0.2 – 6 ? Max. Tool Size (in.) 5/8 x 5/8 ? Compound Slide Travel (in.) 2-11/16 ? Cross Slide Travel (in.) 6-5/16 ? Carriage Travel (in.) 35 ? Tailstock Spindle Travel (in.) 3-3/4 ? Taper in Tailstock Spindle MT-3 ? Steady Rest Capacity (in.) 2-5/8 ? Follow Rest Capacity (in.) 2-3/4 ? Width Of Bed (in.) 7-3/8 ? Dimensions w/Stand: 71”L x 32”W x 47”H ? Main Motor 2HP, 1Ph, 230V Only ? Net Weight (lbs.) 1,015By JET.

The Art of the Lathe $12.98 B.H. Fairchild’s The Art of the Lathe is a collection of poems centering on the working-class world of the Midwest, the isolations of small-town life, and the possibilities and occasions of beauty and grace among the machine shops and oil fields of rural Kansas.

Lathe of Heaven $8.03 {#The Lathe of Heaven} was a made-for-cable remake of the 1980 TV movie of the same name, both based upon the futuristic novel by {$Ursula K. LeGuin}. Former child star {$Lukas Haas} is effectively cast as {%George Orr}, an otherwise ordinary man who expe

13” Swing 40” Centers, 3Hp, 1Ph, 230V Only Geared Head Engine Lathe $9217.95 ? Uniquely designed exclusively by JET ? The hardened and ground gears are featured in the headstock and gearbox. ? Dl-4 spindle is precision ground for accuracy and supported by high-quality tapered roller bearings. ? Headstock is constantly oiled during operation. ? Splined, not keyed, shafts are utilized in the headstock. ? Gearbox gives large threading and feed capabilities with no gear changes. ? V-way bed design is induction hardened and ground. ? Gap bed section provided for larger diameter work. ? Independent leadscrew and feed rod. ? Spindle actuation control is apron mounted. ? Inch-metric dials are standard. ? Compound and cross slide have backlash elimination. ? Adjustable gibs are incorporated in the carriage and slideways. ? Tailstock may be offset for turning tapers and includes an inch-metric graduated quill. ? Tolerance test certificate included. Standard Equipment ? Heavy-Duty Stand ? 6” 3-Jaw Direct Mount Chuck with Top ? Reversing Jaws ? 8” 4-Jaw Chuck ? 12” Face Plate ? Four-way Tool Post ? Steady and Follow Rest ? Micro-Carriage Bed Stop ? Front Removable Chip Tray ? Spindle Jog Button ? Foot Brake ? Coolant System with Splash Guard ? Metric Change Gears ? Halogen Work Lamp ? Centers and Headstock Center Sleeve ? Threading Dial ? Tool Box and tools Specifications ? Swing Over Bed (in.) 13 ? Swing Over Cross Slide (in.) 7-1/2 ? Swing Through Gap (in.) 19 ? Distance Between Centers (in.) 40 ? Spindle Bore (in.) 1-1/2 ? Spindle Mount Dl-4 ? Spindle Taper (With Sleeve) MT-5 (MT-3) ? Number of Spindle Speeds 12 ? Range of Spindle Speeds (RPM) 40 – 1,800 ? Number of Longitudinal and Cross Feeds 40 ? Longitudinal Feeds Range(in./rev.) .0012- .0294 ? Range of Crossfeeds (in./rev.) 0.0003 – 0.0103 ? Number of Inch Threads 40 ? Range of Inch Threads 4-112TPI ? Number of Metric Threads 22 ? Range of Metric Threads (mm) 0.45 – 7.5 ? Maximum Tool Size (in.) 5/8 x 5/8 ? Maximum Compound Slide Travel (in.) 3-1/2 ? Maximum Cross Slide Travel (in.) 6-3/8 ? Maximum Carriage Travel (in.) 37-1/2 ? Tailstock Spindle Travel (in.) 4-3/4 ? Taper in Tailstock Spindle MT-3 ? Steady Rest Capacity (in.) 3-3/4 ? Follow Rest Capacity (in.) 2-3/4 ? Width of Bed (in.) 10-1/2 ? Motor 3HP,230V,lPh ? Dimensions 73-3/4”L x 29-1/2”W x 46-3/4”H ? Net Weight (lbs.) 2081By JET.

Belt Drive Bench Lathe – 9” Swing 20” Centers, 3/4Hp, 1Ph, 115V $1710.95 ? Spindle supported by precision tapered roller bearings. ? Hardened and ground bedways. ? Power longitudinal feed allows threading. ? Standard 1-1/2” x 8 TPI spindle mount allows for many aftermarket accessories. ? Reversing switch included for added versatility. ? Backlash adjustments provided throughout the carriage. ? Tailstock is adjustable for taper cuts. ? Quick-change gear box provides wide range of inch and metric threads. Standard Equipment: ? 7” 4-jaw and 4” three-jaw chuck with threaded back plate ? Face plate ? Four-way tool post ? Single tool post ? Steady and follow rest ? Metric change gears ? Centers ? Threading dial ? Tool box and tools Specifications: ? Swing Over Bed (In.) 8-3/4 ? Swing Over Cross Slide (In.) 5-1/4 ? Distance Between Centers (In.) 20 ? Hole Through Spindle (In.) 25/32 ? Spindle Mount (in. xTPI) 1-1/2 x 8 ? Spindle Taper MT-3 ? Spindle Speeds 6 ? Spindle Speed Range (RPM) 130-2,000 ? Longitudinal Feeds 27 ? Longitudal Feed Range (in. /rev.) 0.005-0.011 ? Inch Threads 27 ? Inch Thread Range 8-56TPI ? Metric Threads 11 ? Metric Thread Range (mm) .5-3 ? Maximum Tool Size (In.) 1/2×1/2 ? Compound Slide Travel (In.) 1-7/8 ? Cross Slide Travel (In.) 5 ? Carriage Travel (In.) 16 ? Tailstock Spindle Travel (In.) 1-9/16 ? Taiistock Spindle Taper MT-2 ? Steady Rest Capacity (In.) 1-7/8 ? Follow Rest Capacity (In.) 1-7/8 ? Bed Width (In.) 4-7/8 ? Dimensions w/Stand 37-1/2”L x 20”W x 45”H ? Motor (TEFC) 3/4HP, 1Ph, 11 5V only ? Net Weight (Lbs.) 235By JET.

The Art Of The Lathe $5.98 “Spielman, one of the best known and most prolific woodworking authors…has created what may be the finest general book available on lathe-turning….[The book] consists of three general sections: Lathes and their uses; how-to projects from a variety of artists featuring jewelry, bowls, a birdhouse, chess pieces, and a handheld mirror; and a gallery of exceptional turnings. The excellent photographs and illustrations will inspire.”—Library Journal

The Lathe of Heaven $3.48 George Orr is a man who discovers he has the peculiar ability to dream things into being — for better or for worse. In desperation, he consults a psychotherapist who promises to help him — but who, it soon becomes clear, has his own plans for George and his dreams.The Lathe of Heaven is a dark vision and a warning — a fable of power uncontrolled and uncontrollable. It is a truly prescient and startling view of humanity, and the consequences of playing God.

7 Great Turning Projects for the Smaller Lathe $13.45 7 Great Turning Projects for the Smaller Lathe

10 Easy Turning Projects for the Smaller Lathe $13.45 10 Easy Turning Projects for the Smaller Lathe

Lathe Operation and Maintenance $24.48 This concise introduction to the lathe provides detailed coverage of this versatile machine and how it is used to perform a wide variety of metalworking operations. Special emphasis is placed on lathe components, accessories, and operating procedures, including basic machine setup and routine maintenance. Cutting dynamics and parameters are explained in clear, easy to comprehend language, and a wide range of cutting tools, toolholders, and workholding devices are examined in detail. This is the ideal introductory text for the novice or machinist-in-training. Review questions follow each chapter.

Wilton 825 – Bd-920W Lathe With S-920N Stand $1993.85 *Product Feature: Bench lathe with stand [825-321155K] Truck Delivery

A small platform to tailstock part 3 of 4